Sagittar SGT-LD-5-23 User Manual download pdf (Page 16)

Chapter 2 Hardware Installation Page 16

Safety Precautions

To ensure your safety and to install the hardware properly, please read and follow these safety

precautions.

ONLY qualified service personnel should service or disassemble this device;

When installing the device, note the followings:

- Do NOT use a metal ladder;

- Do NOT work on a windy or raining day;

- Do NOT install, use or service the device during a thunderstorm, as this may cause a remote

risk of electric shock from lightning;

- Wear shoes with rubber soles and heels, rubber gloves, long sleeved shirt or jacket.

- When the system is operational, avoid standing directly in front of the antenna. Strong RF

fields are present when the transmitter is on.

Ground the device properly with grounding wire to protect against lightning;

Use ONLY appropriate accessories for the device.

If the temperatures of the unit surface exceeds the limit, be precautious not to continuous hold or

touch the device for a certain period of time.

Installation Precautions

To keep the SGT-LD-55-23 in good condition when you are installing it, please read and follow these

installation precautions.

1. Users MUST use a proper and well-installed surge arrestor and grounding kit with SGT-LD-55-23;

otherwise, a random lightning could easily cause fatal damage to SGT-LD-55-23. EMD

(Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY.

2. Make sure the PoE is correctly connected to the RJ-45 port on the SGT-LD-55-23 labelled

PoE+Data. DO NOT CONNECT TO THE PORT LABELED “Warning!! No POE”, otherwise

the SGT-LD-55-23 will be severely damaged!

3. Users MUST power off the SGT-LD-55-23 first before connecting the external antenna to it;

otherwise, damage might be caused to the SGT-LD-55-23 itself.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 79 80

No comments

Sagittar SGT-LD-5-23 User Manual Page 16